ON ANY ORDER $49 OR MORE
Applied automatically at checkout
Some exclusions apply. Free shipping on orders over $49 will be automatically applied at checkout for delivery within the continental US only. International shipping rates and shipping to Alaska, Hawaii, and Puerto Rico will be calculated based on order’s size, weight, and final destination. Oversized and drop ship products such as: Refurbished products are not included.
The front harness for a full support dog wheelchair is a different shape and style than a traditional rear wheelchair. Instead, the quad wheelchair uses leg rings to support the front of the dog.
The leg rings look like two back-to-back “C’s.” When attached to a dog’s cart, the leg rings create a comfortable saddle to support a dog’s weak front legs.
On either side of the silver side extender bar, you’ll see two silver pegs called shoulder socket screws. The should socket screws are located to the right and left of the front leg of the wheelchair. It’s important to note that they should always go over the wheelchair frame when attaching the leg rings. Running the straps over the sidebar will offer your pet additional support in the front.
When a dog walks or stands, its weight does not evenly distribute between its front and back feet. Dogs place the majority of their weight on their front legs. A dog using a four-wheel wheelchair needs very different support than a dog using a rear wheel cart.
A pet with front leg weakness requires more support under its chest to keep them upright, which is why a leg ring support comes standard with every quad Walkin’ Wheels dog wheelchair. Whereas a dog in a rear wheelchair still has strong front legs and requires more support in the back, in this instance, the primary function of the front harness is to attach the dog to the wheelchair.
In a full support Walkin’ Wheels, the dog’s front legs go through either side of the leg ring, with the support sitting firmly under the chest to relieve pressure on the front legs.
Upgraded harnesses for quad carts are available for pets that require extra support and comfort. A quad wheelchair front harness made of a durable material with additional support under the dog’s chest. This style of front harness typically features a top handle or adjustable straps to lift the pet’s front upper body.
A front lifting harness allows pet parents to stabilize their pet as they secure them into their wheelchair. For your dog’s front harness to be fully compatible with a full support Walkin’ Wheels dog wheelchair, the harness must have four quad harness clips attached. A D-ring clip is not compatible. Additional benefits of a dog front lift harness include aiding the dog into a car or helping them climb stairs.
The Walkin’ Wheels Small Quad Harness is the best quad front harness for small pets under 45 pounds. The harness attaches to a Small or Medium full support Walkin’ Wheels wheelchair—the figure-8 shape of the neoprene contours to fit the natural shape of a dog’s front body. The harness provides comfortable front support in and out of the wheelchair.
This harness is not recommended for larger dogs, neoprene can stretch. Heavier dogs will need front harness with a heavier denier.
The Buddy Up Front Harness is compatible with both the rear and quad wheelchairs, depending on the style of clips you use. For dogs previously using their Buddy Up front harness with a rear cart, simply remove the D-ring clips and add the Buddy Up Quad Panel to use with your full support cart. This harness is ideal for lifting large and giant breed dogs.
Additionally, this harness can be combined with the matching rear harness to support your dog’s entire body. Using both the rear and front harnesses will give your dog maximum support at all times.
Yes, replacement clips are available for your dog’s leg rings if needed. Watch the video tutorial below to learn how to remove the old clip and replace it with a new leg ring clip.
Each leg ring is sized to comfortably fit the pet’s breed and weight associated with that wheelchair size. If replacing the leg rings, it’s important to choose the right size leg ring to ensure your dog has enough support and the leg rings fit your pet comfortably. Here’s how to select the right size leg ring for your pet’s quad wheelchair:
| Wheelchair Size | Rear Wheel Size | Leg Rings Needed |
| Walkin’ Wheels Mini B1 | 2″ | Mini 5.5″ |
| Walkin’ Wheels Mini B2, B3, B5 | 4″ | Mini 7″ |
| Walkin’ Wheels Small | 4″ | 6″ |
| Walkin’ Wheels Small | 8″ | 8″ |
| Walkin’ Wheels Medium | 4″ & 8″ | 11″ |
| Walkin’ Wheels Medium 12″ strut | 8″ | 13″ |
| Walkin’ Wheels Medium & Large | 8″ & 12″ | 13″ |
| Walkin’ Wheels Medium & Large | 16″ | 17″ |
When attached to the wheelchair frame, the leg rings should look like two C’s and hang a few inches below the side bar. There should be plenty of room to comfortably place your dog’s legs in the leg rings. When the leg rings are attached incorrectly, they will look like two V’s.
It’s important that both sets of leg rings are set up correctly. When they are shaped like back-to-back C’s there will be plenty of space for your dog’s legs to sit comfortably, and the support will be exactly where your dog will need it, under their pelvis and under its chest. Still have questions? Our Wheelchair Experts are happy to schedule a 1-on-1 fitting evaluation of your dog’s wheelchair in person, over Facetime, or even through Zoom! Call 1-888-253-0777 to schedule your fitting appointment today!
