Your new SleePee Time® Bed!

Contents (Replacements available at www.HandicappedPets.com):

A) 1 – Rear Bolster (machine wash, gentle) B) 1 – Front Cushion (machine wash, gentle) C) 1 – Plastic tray (Rinse to clean) D) 1 – Mesh bed surface (Rinse to clean)

E) 4 – Small PVC legs w/endcaps F) 6 – 24 inch PVC pipes G) 2 – Tee’s H) 4 – Three way corner connectors

Step 1:

Feed PVC pipes (F) through the mesh and connect them in the middle with a Tee (G). Put a corner connector on each end.

Step 2:

Feed PVC pieces through the sides and insert them in the corner pieces. Verify that all six leg-holes are open in the correct direction.

Step 3:

Install the endcaps on the end of the legs, and install the legs.

Step 4:

Line up the Velcro on the top of the mesh with the Velcro on the front cushion. Attach the cushion and the bolster. The tray slides underneath.