Your new SleePee Time® Bed!

Contents (Replacements available at www.HandicappedPets.com):

A) 1 – Rear Bolster (machine wash, gentle) B) 1 – Front Cushion (machine wash, gentle) C) 1 – Plastic tray (Rinse to clean) D) 1 – Mesh bed surface (Rinse to clean)

E) 4 – Small PVC legs w/endcaps F) 2 – Medium size side PVC pipes G) 2 – Long front and back PVC pipes H) 4 – Three way corner connectors

Step 1:

Feed a side pipe (F) through one side of the mesh and attach a three way corner connector (H) to each end. Note that the Velcro is on the top side of the mesh and that open hole in the three way connector faces down. Note: It is recommended that the side pipe be installed first to avoid stretching the mesh fabric.

Step 2:

Feed long front and back pipes through the front and back of the mesh, and into the three way corner connector. Then the final side pipe and corner. Verify that you’ve remembered that the Velcro faces the top of the bed and the open hole for the legs face down. Even brilliant minds have been known to do this backwards.

Step 3:

Install the endcaps on the end of the legs, and install the legs.

Step 4:

Line up the Velcro on the top of the mesh with the Velcro on the front cushion. Attach the cushion and the bolster. The tray slides underneath.

Step 5: Just add Dog.